Time Proportioning
Power Control to 25A
- S Series TP |
|
Features:
- Command input accepts 4-20mA, 0-0V, 0-5V, 0-135Ω, Potentiometer
- Configurable for 4 different cycle times
- Drives multiple solid state relays (SSRs)
- LED output indiactor
- Automatic 50/60Hz operation
- Adjustable Power Limit (-PL) Option
- Single phase and three phase control
- Solid State Relay Assemblies rated to 25A/pole @ 40° C (100% duty cycle)
- Suitable for inductive loads (w -10 option)
- Standard relays approved to the following: UL,
CSA, VDE and CE |
| OUTPUT SPECIFICATIONS |
|
| |
TP-25DS |
TP-25HDS |
TP-625HDS |
TP-50DS |
TP-50HDS |
TP-650HDS |
| Operating Voltage (47-63 Hz) [Vrms] |
24-280 |
48-530 |
48-660 |
24-280 |
48-530 |
48-660 |
| Load Current Range [Arms] |
.04-15 |
.04-15 |
.04-15 |
.04-25 |
.04-25 |
.04-25 |
| Transient Overvoltage [Vpk] |
600 |
1200 |
1200 |
600 |
625 |
1200 |
| Max. Surge Current, (16.6ms) [Apk] |
250 |
250 |
250 |
625 |
625 |
625 |
| Max. On-State Voltage Drop [Vpk] |
1.6 |
1.7 |
1.7 |
1.6 |
1.7 |
1.7 |
| Max. Turn-on and Turn-off Time |
1/2 cycle |
1/2 cycle |
1/2 cycle |
1/2 cycle |
1/2 cycle |
1/2 cycle |
| Max.I²t for fusing (8.3mS) |
260 |
260 |
260 |
1620 |
1620 |
1620 |
| Max. Off-State Leakage Current [mArms] |
10 |
10 |
5 |
10 |
10 |
5 |
| Power Factor (Min.) with Max. Load |
0.5 |
0.5 |
0.5 |
0.5 |
0.5 |
0.5 |
|
Input Specifications:
0-10VDC
0-5VDC
2-10VDC
1-5VDC
4-20mA
0-20mA
Potentiometer
0-135Ω (Change prefix to LPC35-)
Pulse Width Modulation (Change prefix to TP135-) |
|
|
Time Proportioning
Power Control to 40A
- A Series TP |
|
Features:
- Command input accepts 4-20mA, 0-10V, 0-5V, 0-135Ω, Potentiometer
- Configurable for 4 different cycle times
- Drives multiple solid state relays (SSRs)
- LED output indiactor
- Automatic 50/60Hz operation
- Adjustable Power Limit (-PL) Option
- Single phase and three phase control
- Solid State Relay Assemblies rated to
40A/pole @ 40° C (100% duty cycle)
- Suitable for inductive loads (w -10 option)
- Standard relays approved to the following: UL,
CSA, VDE and CE |
| OUTPUT SPECIFICATIONS |
|
| |
TP-25DA |
TP-25HDA |
TP-50DA |
TP-50HDA |
TP-90HDA |
TP-690HDA |
| Operating Voltage (47-63 Hz) [Vrms] |
24-280 |
48-530 |
24-280 |
48-530 |
48-530 |
48-660 |
| Load Current Range [Arms] |
.04-20 |
.04-20 |
.04-30 |
.04-30 |
.04-40 |
.04-40 |
| Transient Overvoltage [Vpk] |
600 |
1200 |
600 |
1200 |
1200 |
1200 |
| Max. Surge Current, (16.6ms) (Apk) |
250 |
250 |
625 |
625 |
1200 |
1200 |
| Max. On-State Voltage Drop [Vpk] |
1.6 |
1.7 |
1.6 |
1.7 |
1.7 |
1.7 |
| Max. Turn-on and Turn-off Time |
1/2 cycle |
1/2 cycle |
1/2 cycle |
1/2 cycle |
1/2 cycle |
1/2 cycle |
| Max.I²t for fusing (8.3mS) |
260 |
260 |
1620 |
1620 |
6000 |
6000 |
| Max. Off-State Leakage Current [mArms] |
10 |
10 |
10 |
10 |
10 |
5 |
| Power Factor (Min.) with Max. Load |
0.5 |
0.5 |
0.5 |
0.5 |
0.5 |
0.5 |
|
Input Specifications:
0-10VDC
0-5VDC
2-10VDC
1-5VDC
4-20mA
0-20mA
Potentiometer
0-135Ω (Change prefix to LPC35-)
Pulse Width Modulation (Change prefix to TP135-) |
|
|
Time Proportioning
Power Control to 50A
- L Series TP |
|
Features:
- Command input accepts 4-20mA, 0-10V, 0-5V, 0-135Ω, Potentiometer
- Configurable for 4 different cycle times
- Drives multiple solid state relays (SSRs)
- LED output indiactor
- Automatic 50/60Hz operation
- Adjustable Power Limit (-PL) Option
- Single phase and three phase control
- Solid State Relay Assemblies rated to
50A/pole @ 40° C (100% duty cycle)
- Suitable for inductive loads (w -10 option)
- Standard relays approved to the following: UL,
CSA, VDE and CE |
| OUTPUT SPECIFICATIONS |
|
| |
TP-90HDL |
TP-690HDL |
| Operating Voltage (47-63 Hz) [Vrms] |
48-530 |
48-660 |
| Load Current Range [Arms] |
.04-50 |
.04-50 |
| Transient Overvoltage [Vpk] |
1200 |
1200 |
| Max. Surge Current, (16.6ms) [Apk] |
1200 |
1200 |
| Max. On-State Voltage Drop [Vpk] |
1.7 |
1.7 |
| Max. Turn-on Time |
1/2 cycle |
1/2 cycle |
| Max. Turn-off Time |
1/2 cycle |
1/2 cycle |
| Max.I²t for fusing (8.3mS) |
6000 |
6000 |
| Max. Off-State Leakage Current [mArms] |
10 |
5 |
| Power Factor (Min.) with Max. Load |
0.5 |
0.5 |
|
Input Specifications:
0-10VDC
0-5VDC
2-10VDC
1-5VDC
4-20mA
0-20mA
Potentiometer
0-135Ω (Change prefix to LPC35-)
Pulse Width Modulation (Change prefix to TP135-) |
|
|
Time Proportioning
Power Control to 70A
- K Series TP |
|
Features:
- Command input accepts 4-20mA, 0-10V, 0-5V, 0-135Ω, Potentiometer
- Configurable for 4 different cycle times
- Drives multiple solid state relays (SSRs)
- LED output indiactor
- Automatic 50/60Hz operation
- Adjustable Power Limit (-PL) Option
- Single phase and three phase control
- Solid State Relay Assemblies rated to
70A/pole @ 40° C (100% duty cycle)
- Suitable for inductive loads (w -10 option)
- Standard relays approved to the following: UL,
CSA, VDE and CE |
| OUTPUT SPECIFICATIONS |
|
| |
TP-90HDXK |
TP-690HDXK |
TP-125HDXK |
TP-90HDK-2
3 Phase / 2 Pole |
| |
| Operating Voltage (47-63 Hz) [Vrms] |
48-530 |
48-660 |
48-530 |
48-530 |
| Load Current Range [Arms] |
.04-60 |
.04-60 |
.04-70 |
0.1-40 / pole |
| Transient Overvoltage [Vpk] |
1200 |
1200 |
1200 |
1200 |
| Max. Surge Current, (16.6ms) [Apk] |
1200 |
1200 |
1750 |
1200 |
| Max. On-State Voltage Drop [Vpk] |
1.7 |
1.7 |
1.7 |
1.7 |
| Max. Turn-on Time |
1/2 cycle |
1/2 cycle |
10.0mS |
1/2 cycle |
| Max. Turn-off Time |
1/2 cycle |
1/2 cycle |
40.0mS |
1/2 cycle |
| Max.I²t for fusing (8.3mS) |
6000 |
6000 |
12,700 |
6000 |
| Max. Off-State Leakage Current [mArms] |
10 |
5 |
10 |
10 |
| Power Factor (Min.) with Max. Load |
0.5 |
0.5 |
0.5 |
0.5 |
|
Input Specifications:
0-10VDC
0-5VDC
2-10VDC
1-5VDC
4-20mA
0-20mA
Potentiometer
0-135Ω (Change prefix to LPC35-)
Pulse Width Modulation (Change prefix to TP135-) |
|
|
Time Proportioning
Power Control to 80A
- N Series TP |
|
Features:
- Command input accepts 4-20mA, 0-10V, 0-5V, 0-135Ω, Potentiometer
- Configurable for 4 different cycle times
- Drives multiple solid state relays (SSRs)
- LED output indiactor
- Automatic 50/60Hz operation
- Adjustable Power Limit (-PL) Option
- Single phase and three phase control
- Solid State Relay Assemblies rated to
80A/pole @ 40° C (100% duty cycle)
- Suitable for inductive loads (w -10 option)
- Standard relays approved to the following: UL,
CSA, VDE and CE |
| OUTPUT SPECIFICATIONS |
|
| |
TP-50DN |
TP-50HDN |
TP-90HDN |
TP-125HDN |
| Operating Voltage (47-63 Hz) [Vrms] |
24-280 |
48-530 |
48-530 |
48-530 |
| Load Current Range [Arms] |
.04-45 |
.04-45 |
.04-70 |
.04-80 |
| Transient Overvoltage [Vpk] |
600 |
1200 |
1200 |
1200 |
| Max. Surge Current, (16.6ms) [Apk] |
625 |
625 |
1200 |
1750 |
| Max. On-State Voltage Drop [Vpk] |
1.6 |
1.7 |
1.7 |
1.7 |
| Max. Turn-on Time |
1/2 cycle |
1/2 cycle |
1/2 cycle |
1/2 cycle |
| Max. Turn-off Time |
1/2 cycle |
1/2 cycle |
1/2 cycle |
1/2 cycle |
| Max.I²t for fusing (8.3mS) [A²sec] |
1620 |
1620 |
6000 |
12,700 |
| Max. Off-State Leakage Current [mArms] |
10 |
10 |
10 |
10 |
| Power Factor (Min.) with Max. Load |
0.5 |
0.5 |
0.5 |
0.5 |
|
Input Specifications:
0-10VDC
0-5VDC
2-10VDC
1-5VDC
4-20mA
0-20mA
Potentiometer
0-135Ω (Change prefix to LPC35-)
Pulse Width Modulation (Change prefix to TP135-) |
|
|
Time Proportioning
Power Control to 100A
- F Series TP |
|
Features:
- Command input accepts 4-20mA, 0-10V, 0-5V, 0-135Ω, Potentiometer
- Configurable for 4 different cycle times
- Drives multiple solid state relays (SSRs)
- LED output indiactor
- Automatic 50/60Hz operation
- Adjustable Power Limit (-PL) Option
- Single phase and three phase control
- Solid State Relay Assemblies rated to
100A/pole @ 40° C (100% duty cycle)
- Suitable for inductive loads (w -10 option)
- Standard relays approved to the following: UL,
CSA, VDE and CE |
| OUTPUT SPECIFICATIONS |
|
| |
TP-90DF2 |
TP-90DF3 |
TP-125DF2 |
TP-125DF3 |
| |
| FAN OPTION (Add letter of Fan to end of above part #) |
B-120VAC Fan |
C - 240VAC Fan |
I - 24VDC Fan |
| (EX: TPLP-125AF2B - Denotes 3 Phase, 2 Pole, w/120VAC Fan) |
| |
| |
3 Phase / 2 Pole |
3 Phase / 3 Pole |
3 Phase / 2 Pole |
3 Phase / 3 Pole |
| Operating Voltage (47-63 Hz) [Vrms] |
48-530 |
48-530 |
48-530 |
48-530 |
| Load Current Range [Arms] |
.04-80 |
.04-80 |
.04-100 |
.04-100 |
| Transient Overvoltage [Vpk] |
1200 |
1200 |
1200 |
1200 |
| Max. Surge Current, (16.6ms) [Apk] |
1200 |
1200 |
1750 |
1750 |
| Max. On-State Voltage Drop [Vpk] |
1.7 |
1.7 |
1.7 |
1.7 |
| Max. Turn-on Time |
1/2 cycle |
1/2 cycle |
1/2 cycle |
1/2 cycle |
| Max. Turn-off Time |
1/2 cycle |
1/2 cycle |
1/2 cycle |
1/2 cycle |
| Max.I²t for fusing (8.3mS) |
12700 |
12700 |
12700 |
12700 |
| Max. Off-State Leakage Current [mArms] |
10 |
10 |
10 |
10 |
| Power Factor (Min.) with Max. Load |
0.5 |
0.5 |
0.5 |
0.5 |
|
Input Specifications:
0-10VDC
0-5VDC
2-10VDC
1-5VDC
4-20mA
0-20mA
Potentiometer
0-135Ω (Change prefix to LPC35-)
Pulse Width Modulation (Change prefix to TP135-) |
|
|
Time Proportioning
Power Control to 25A
- S Series TPLP |
|
Features:
- Provides precisse time proportioned 0-100% output
- Loop powered - no external power supply required
- 4 to 20mA command signal input
- Drops only 6.3 Volts of total loop voltage
- Drives multiple Solid State Relays (SSRs)
- On board LED output indiactor
- Solid State Relay Assemblies rated to
25A/pole @ 40° C (100% duty cycle)
- Suitable for inductive loads (w -10 option)
- Standard relays approved to the following: UL,
CSA, VDE and CE |
| OUTPUT SPECIFICATIONS |
|
| |
TPLP-25DS |
TPLP-25HDS |
TPLP-625HDS |
TPLP-50DS |
TPLP-50HDS |
TPLP-650HDS |
| Operating Voltage (47-63 Hz) [Vrms] |
24-280 |
48-530 |
48-660 |
24-280 |
48-530 |
48-660 |
| Load Current Range [Arms] |
.04-15 |
.04-15 |
.04-15 |
.04-25 |
.04-25 |
.04-25 |
| Transient Overvoltage [Vpk] |
600 |
1200 |
1200 |
600 |
625 |
1200 |
| Max. Surge Current, (16.6ms) [Apk] |
250 |
250 |
250 |
625 |
625 |
625 |
| Max. On-State Voltage Drop [Vpk] |
1.6 |
1.7 |
1.7 |
1.6 |
1.7 |
1.7 |
| Max. Turn-on and Turn-off Time |
1/2 cycle |
1/2 cycle |
1/2 cycle |
1/2 cycle |
1/2 cycle |
1/2 cycle |
| Max.I²t for fusing (8.3mS) |
260 |
260 |
260 |
1620 |
1620 |
1620 |
| Max. Off-State Leakage Current [mArms] |
10 |
10 |
5 |
10 |
10 |
5 |
| Power Factor (Min.) with Max. Load |
0.5 |
0.5 |
0.5 |
0.5 |
0.5 |
0.5 |
|
| Input Specifications: 4-20mA |
Input Options: Zero and Span Pots Available (TPLPZ) |
|
|
Time Proportioning
Power Control to 40A
- A Series TPLP |
|
Features:
- Provides precise time proportioned 0-100% output
- Loop powered - no external power supply required
- 4 to 20mA command signal input
- Drops only 6.3 Volts of total loop voltage
- Drives multiple Solid State Relays (SSRs)
- On board LED output indiactor
- Solid State Relay Assemblies rated to
40A/pole @ 40° C (100% duty cycle)
- Suitable for inductive loads (w -10 option)
- Standard relays approved to the following: UL,
CSA, VDE and CE |
| OUTPUT SPECIFICATIONS |
|
| |
TPLP-25DA |
TPLP-25HDA |
TPLP-50DA |
TPLP-50HDA |
TPLP-90HDA |
TPLP-690HDA |
| |
|
|
|
|
|
|
| Operating Voltage (47-63 Hz) [Vrms] |
24-280 |
48-530 |
24-280 |
48-530 |
48-530 |
48-660 |
| Load Current Range [Arms] |
.04-20 |
.04-20 |
.04-30 |
.04-30 |
.04-40 |
.04-40 |
| Transient Overvoltage [Vpk] |
600 |
1200 |
600 |
1200 |
1200 |
1200 |
| Max. Surge Current, (16.6ms) (Apk) |
250 |
250 |
625 |
625 |
1200 |
1200 |
| Max. On-State Voltage Drop [Vpk] |
1.6 |
1.7 |
1.6 |
1.7 |
1.7 |
1.7 |
| Max. Turn-on and Turn-off Time |
1/2 cycle |
1/2 cycle |
1/2 cycle |
1/2 cycle |
1/2 cycle |
1/2 cycle |
| Max.I²t for fusing (8.3mS) |
260 |
260 |
1620 |
1620 |
6000 |
6000 |
| Max. Off-State Leakage Current [mArms] |
10 |
10 |
10 |
10 |
10 |
5 |
| Power Factor (Min.) with Max. Load |
0.5 |
0.5 |
0.5 |
0.5 |
0.5 |
0.5 |
|
| Input Specifications: 4-20mA |
Input Options: Zero and Span Pots Available (TPLPZ) |
|
|
Time Proportioning
Power Control to 50A
- L Series TPLP |
|
Features:
- Provides precisse time proportioned 0-100% output
- Loop powered - no external power supply required
- 4 to 20mA command signal input
- Drops only 6.3 Volts of total loop voltage
- Drives multiple Solid State Relays (SSRs)
- On board LED output indiactor
- Solid State Relay Assemblies rated to
50A/pole @ 40° C (100% duty cycle)
- Suitable for inductive loads (w -10 option)
- Standard relays approved to the following: UL,
CSA, VDE and CE |
| OUTPUT SPECIFICATIONS |
|
| |
TPLP-90HDL |
TPLP-690HDL |
| Operating Voltage (47-63 Hz) [Vrms] |
48-530 |
48-660 |
| Load Current Range [Arms] |
.04-50 |
.04-50 |
| Transient Overvoltage [Vpk] |
1200 |
1200 |
| Max. Surge Current, (16.6ms) [Apk] |
1200 |
1200 |
| Max. On-State Voltage Drop [Vpk] |
1.7 |
1.7 |
| Max. Turn-on Time |
1/2 cycle |
1/2 cycle |
| Max. Turn-off Time |
1/2 cycle |
1/2 cycle |
| Max.I²t for fusing (8.3mS) |
6000 |
6000 |
| Max. Off-State Leakage Current [mArms] |
10 |
5 |
| Power Factor (Min.) with Max. Load |
0.5 |
0.5 |
|
| Input Specifications: 4-20mA |
Input Options: Zero and Span Pots Available (TPLPZ) |
|
|
Time Proportioning
Power Control to 60A
- K Series TPLP |
|
FEATURES:
- Provides precise time proportioned 0-100% output
- Loop powered - no external power supply required
- 4 to 20mA command signal input
- Drops only 6.3 Volts of total loop voltage
- Drives multiple Solid State Relays (SSRs)
- On board LED Indication
- Solid State Relay Assemblies rated to
60A/Pole @ 40ºC (100% duty cycle)
- Suitable for inductive loads (w -10 option)
- Standard relays approved to the following: UL
CE, CSA & VDE
- DIN mount standard |
| OUTPUT SPECIFICATIONS |
3 Phase / 2 Pole
TPLP-90HDK-2
|
| |
TPLP-90HDXK |
TPLP-690HDXK |
| Operating Voltage (47-63 Hz) [Vrms] |
48-530 |
48-660 |
48-530 |
| Load Current Range [Arms] |
.04-60 |
.04-60 |
.01-40 / pole |
| Transient Overvoltage [Vpk] |
1200 |
1200 |
1200 |
| Max. Surge Current, (16.6ms) [Apk] |
1200 |
1200 |
1200 |
| Max. On-State Voltage Drop [Vpk] |
1.7 |
1.7 |
1.7 |
| Max. Turn-on Time |
|
1/2 cycle |
1/2 cycle |
| Max. Turn-off Time |
1/2 cycle |
1/2 cycle |
1/2 cycle |
| Max.I²t for fusing (8.3mS) |
|
6000 |
6000 |
| Max. Off-State Leakage Current [mArms] |
10 |
5 |
10 |
| Power Factor (Min.) with Max. Load |
0.5 |
0.5 |
0.5 |
|
| Input Specifications: 4-20mA |
Input Options:
Zero and Span Pots
(Change Prefix to:
TPLPZ)
Ex.: TPLP-90HDKX = TPLPZ-90HDXK |
|
|
Time Proportioning
Power Control to 80A
- N Series TPLP |
|
Features:
- Provides precisse time proportioned 0-100% output
- Loop powered - no external power supply required
- 4 to 20mA command signal input
- Drops only 6.3 Volts of total loop voltage
- Drives multiple Solid State Relays (SSRs)
- On board LED output indiactor
- Solid State Relay Assemblies rated to
80A/pole @ 40° C (100% duty cycle)
- Suitable for inductive loads (w -10 option)
- Standard relays approved to the following: UL,
CSA, VDE and CE |
| OUTPUT SPECIFICATIONS |
|
| |
TPLP-50DN |
TPLP-50HDN |
TPLP-90HDN |
TPLP-125HDN |
| Operating Voltage (47-63 Hz) [Vrms] |
24-280 |
48-530 |
48-530 |
48-530 |
| Load Current Range [Arms] |
.04-45 |
.04-45 |
.04-70 |
.04-80 |
| Transient Overvoltage [Vpk] |
600 |
1200 |
1200 |
1200 |
| Max. Surge Current, (16.6ms) [Apk] |
625 |
625 |
1200 |
1750 |
| Max. On-State Voltage Drop [Vpk] |
1.6 |
1.7 |
1.7 |
1.7 |
| Max. Turn-on Time |
1/2 cycle |
1/2 cycle |
1/2 cycle |
1/2 cycle |
| Max. Turn-off Time |
1/2 cycle |
1/2 cycle |
1/2 cycle |
1/2 cycle |
| Max.I²t for fusing (8.3mS) [A²sec] |
1620 |
1620 |
6000 |
12,700 |
| Max. Off-State Leakage Current [mArms] |
10 |
10 |
10 |
10 |
| Power Factor (Min.) with Max. Load |
0.5 |
0.5 |
0.5 |
0.5 |
|
| Input Specifications: 4-20mA |
Input Options: Zero and Span Pots Available (TPLPZ) |
|
|
Time Proportioning
Power Control to 100A
- F Series TPLP |
|
Features:
- Provides precisse time proportioned 0-100% output
- Loop powered - no external power supply required
- 4 to 20mA command signal input
- Drops only 6.3 Volts of total loop voltage
- Drives multiple Solid State Relays (SSRs)
- On board LED output indiactor
- Solid State Relay Assemblies rated to
100A/pole @ 40° C (100% duty cycle)
- Suitable for inductive loads (w -10 option)
- Standard relays approved to the following: UL,
CSA, VDE and CE |
| OUTPUT SPECIFICATIONS |
|
|
|
|
| |
TPLP-90DF2 |
TPLP-90DF3 |
TPLP-125DF2 |
TPLP-125DF3 |
| |
|
|
|
|
| FAN OPTION (Add letter of Fan to end of above part #) |
|
B-120VAC Fan |
C - 240VAC Fan |
I - 24VDC Fan |
| (EX: TPLP-125AF2B - Denotes 3 Phase, 2 Pole, w/120VAC Fan)
|
|
| |
|
|
| |
3 Phase / 2 Pole |
3 Phase / 3 Pole |
3 Phase / 2 Pole |
3 Phase / 3 Pole |
| Operating Voltage (47-63 Hz) [Vrms] |
48-530 |
48-530 |
48-530 |
48-530 |
| Load Current Range [Arms] |
.04-80 |
.04-80 |
.04-100 |
.04-100 |
| Transient Overvoltage [Vpk] |
1200 |
1200 |
1200 |
1200 |
| Max. Surge Current, (16.6ms) [Apk] |
1200 |
1200 |
1750 |
1750 |
| Max. On-State Voltage Drop [Vpk] |
1.7 |
1.7 |
1.7 |
1.7 |
| Max. Turn-on Time |
1/2 cycle |
1/2 cycle |
1/2 cycle |
1/2 cycle |
| Max. Turn-off Time |
1/2 cycle |
1/2 cycle |
1/2 cycle |
1/2 cycle |
| Max.I²t for fusing (8.3mS) |
12700 |
12700 |
12700 |
12700 |
| Max. Off-State Leakage Current [mArms] |
10 |
10 |
10 |
10 |
| Power Factor (Min.) with Max. Load |
0.5 |
0.5 |
0.5 |
0.5 |
|
| Input Specifications: 4-20mA |
Input Options: Zero and Span Pots Available (TPLPZ) |
|
|
Home
