LPC / TP / TPLP L Series 50A
Proportional Output Power Controllers
HOME | Products | Proportional Controllers | L Series
-
DIN mount, Proportional output solid state relay / heat sink assemblies
-
LPC series provides a percentage of each AC cycle to the load in direct proportion to analog input signal
-
TP & TPLP series provide a series of full on/off AC cycles to the load in direct proportion to analog input signal
-
Ratings up-to 50 amps @ 24-660Vac in a 40°C ambient
-
4-20mA input (TPLP) or selectable analog input (LPC & TP); 0-10Vdc, 1-5Vdc, 2-10Vdc, 1-5Vdc, 4-20mA or potentiometer
-
TPLP series (4-20mA input) does not require an external power supply
-
True linear output controller with selectable soft-start,
suitable for resistive or inductive loads -
Fully pre-assembled and ready for installation
-
Epoxy-free design eliminates internal stress and enhances life expectancy
-
Direct copper bonding (DCB) substrate for superior thermal performance
-
MTBF > 7 million hours (>800 years)
-
Agency approvals; UL, CSA, VDE/TUV, and CE


LPC L Series Phase-Angle Controllers
LPC-90HDL
50 Amp / 48-530Vac HD4890-10 Solid State Relay Assembly
Operating Voltage
48 - 530Vac
Load Current
.15 - 50 Amps
Input Type
Analog
Input Mode
Selectable
Output Switching
Phase-Angle
LPC-690HDL
50 Amp / 48-660Vac HD6090-10 Solid State Relay Assembly
Operating Voltage
48 - 660Vac
Load Current
.15 - 50 Amps
Input Type
Analog
Input Mode
Selectable
Output Switching
Phase-Angle
TP-90HDL
50 Amp / 48-530Vac HD4890 Solid State Relay Assembly
Operating Voltage
48 - 530Vac
Load Current
.15 - 50 Amps
Input Type
Analog
Input Mode
Selectable
Output Switching
Burst Fire
TP-690HDL
50 Amp / 48-660Vac HD6090 Solid State Relay Assembly
Operating Voltage
48 - 660Vac
Load Current
.15 - 50 Amps
Input Type
Analog
Input Mode
Selectable
Output Switching
Burst Fire
TP L Series Burst Fire Controllers
TPLP L Series Burst Fire Controllers
TPLP-90HDL
50 Amp / 48-530Vac HD4890 Solid State Relay Assembly
Operating Voltage
48 - 530Vac
Load Current
.15 - 50 Amps
Input Type
Analog
Input Mode
4 - 20mA
Output Switching
Burst Fire
TPLP-690HDL
50 Amp / 48-660Vac HD6090 Solid State Relay Assembly
Operating Voltage
48 - 660Vac
Load Current
.15 - 50 Amps
Input Type
Analog
Input Mode
4 - 20mA
Output Switching
Burst Fire