- DIN Mount Solid State Power Controller
- Utilizes 1x Crydom CX380D5 SIP solid-state relay
- DC input (4-15Vdc), zero-crossing 480Vac / 5A output @ 40C
- Narrow 0.5" wide design to accommodate high-density applications
- LED input status indicator
- Instantaneous ("Random") turn-on version available for controlling inductive loads ("-R" suffix)
- Agency approvals; UL, CSA, VDE/TUV, and CE
In Stock - product normally ships within 24 hours. Please contact us at 800.879.7918 / firstname.lastname@example.org for order quantities ≥10 pieces to confirm availability and volume discount pricing.
International Shipping: HBControls ships internationally to all non-sanctioned countries. For orders outside of the United States, Mexico or Canada, please contact us at +1 800 879 7918 / email@example.com.
Lower pricing and quantity discounts may be available through our network of authorized distributors.
Product Datasheet: HBControls -11-CX Series Compact Power Controllers
The HBC-11-CX380D5 is a Crydom PCB mount CX380D5 solid state relay mounted in a compact, 0.5” (12mm) DIN mount carrier. The HBC-11-CX380D5 / CX380D5 power controller / solid state relay is capable of switching 5 amp loads at line voltages between 48Vac and 530Vac, making it an ideal solution for high-density applications requiring relatively high-power switching in a compact environment. The output circuit of the HBC-11-CX380D5 utilizes rugged back-to-back SCRs (inverse-parallel) to switch load current, which enables them to perform reliably for millions of hours in harsh industrial applications. The specified MTBF for the HBC-11-CX380D5 is >7 million hours when operating in a 60°C ambient environment, and increases to >11 million hours in a 40°C ambient.
The input of the HBC-11-CX380D5 accepts control signals between 3Vdc and 15Vdc and pulls <15mA @ 5Vdc. Since the CX380D5 solid state relay only requires a minimal amount of input current, they are commonly used to switch power to/from larger electromechanical relays and contactors in applications with low-power control circuits. An internal optical isolator provides 4kVrms dielectric protection between the AC mains and personnel / control circuitry. The zero-crossing output circuit will only trigger the output SCRs when the AC mains passes through the zero-crossing point of the sine wave. This greatly minimizes surge currents and reduces the level of conducted emissions generated by the solid state relay.
Typical applications for the HBC-11-CX380D5 include resistive heating, motor loads and other inductive loads with a power factor ≥0.5. They are commonly used as stand-alone solid state relays, or as a supplement to control boards or PLCs with limited outputs.
Additional DIN mount PCB solid state relays can be found in the Compact Power Controller section of our website.
Please contact our technical support team at 800.879.7918 / firstname.lastname@example.org if you’d like more information on the -11 series compact power controllers, or if you’d like to discuss other products available from HBControls and your specific application requirements.