• DIN Mount Burst-Fire (Time Proportioning) Solid State Power Controller
  • Utilizes 1x Crydom HD6090 solid-state relay
  • 48-660Vac / 40A proportional output (burst fire) @ 40C
  • Selectable time-base period and analog input; 0-10Vdc, 0-5Vdc, 2-10Vdc, 1-5Vdc, 4-20mA or potentiometer
  • LED input-status indicator
  • Selectable soft-start
  • Direct-bond copper (DBC) substrate for superior thermal performance
  • Epoxy free design eliminates stress on internal components due to epoxy expansion and contraction
  • Direct-power lead-frame design reduces solder joints and enhances reliability
  • Touch-safe cover
  • Agency approvals; UL, CSA, VDE/TUV, and CE
  • Available Options: Overvoltage Protection (-M), Panel-Mount Heat Sink (-PM). Additional options are provided in the product datasheet.

TP-690HDA 40 Amp / 48-660Vac Burst Fire Solid State Power Controller

$224.96Price
Over Voltage Protection
DIN Mount Power Supply
  • Additional Information:

    In Stock: Product normally ships within 24 hours. 

     

    Shipping: All website orders are eligible for free UPS Ground shipping within the United States

     

    Discount Codes:

    HBC1K -  Enter promo code on checkout to receive a 10% discount on orders ≥$1,000. 

     

    Please submit a quote request form for volume pricing ≥15 pieces.

     

    Condition: New / Unused

     

    Product Datasheet: HBControls TP A Series Burst Fire Controllers

     

    Users Manual: TP Series Users Manual

     

    Warranty: Additional information is available on the Policies page of our website 

     

  • Product Description:

    The HBControls TP-690HDA is a proportional output (burst fire) solid state power controller, utilizing a Crydom HD6090 solid state relay and a microprocessor-based control board. Fully assembled and ready-to-use, the TP-690HDA / HD6090 solid-state relay provides 0% to 100% power to resistive loads in proportion to the analog input provided. The TP-690HDA is rated to 40 amps at line voltages between 48Vac and 660Vac, and ideally suited to resistive heating applications where precise temperature control is desired.

     

    The output circuit of the Crydom HD6090 consists of two SCRs configured in inverse-parallel (back-to-back) capable of withstanding surge currents up-to 1,200 amps (non-repetitive). Furthermore, the SCRs are mounted to a DBC substrate (direct bond copper), which minimizes thermal excursions and enhances overall life expectancy. This enables the TP-690HDA to operate safely and reliably in harsh industrial applications with MTBF ratings in excess of 7 million hours.

     

    The TP-690HDA can accept a wide range of analog inputs, including; 0-10Vdc, 1-5Vdc, 2-10Vdc, 1-5Vdc or 4-20mA. An external potentiometer can also be used to control the amount of power applied to the AC load.

     

    The microprocessor-based control board requires an external 24Vac power supply. HBControls offers a range of power supplies perfectly suited for the TP series power controllers. The TP-690HDA is also available with a 24Vac power supply pre-assembled onto the assembly (“PS-xxx” option).

     

    Operation Mode:

     

    Burst Fire: The output of the TP-690HDA / HD6090 provide a series a full AC cycles to the load, with the ratio of on/off cycles directly proportional to the analog input provided. For example, if the selector switch on the control board is set to 0-10V, then the percentage of power applied to the load will be directly proportional to the 0-10V analog input. If the signal is at 5V, the output will conduct load current for a few cycles and then turn off for an equivalent number of cycles, effectively applying 50% power. If the load is a heating element and the temperature starts to go beyond the set-point with 50% power being applied, then the controller might reduce its output to 4V. If so, then the solid state relay would reduce its output power to 40% by adjusting its on/off ratio to 40%.  

     

    Additional Features & Benefits of the TP-690HDA / Crydom HD6090 include:

    • True linear output controller with selectable soft-start, suitable for resistive or inductive loads
    • Selectable analog input; 0-10Vdc, 1-5Vdc, 2-10Vdc, 1- 5Vdc, 4-20mA or potentiometer
    • Line-voltage compensation with automatic 50/60Hz operation
    • Compact, thermally efficient heat sink to maximize overall product life expectancy
    • Direct-bond copper (DBC) substrate for superior thermal performance
    • MTBF > 7 million hours (>800 years)
    • Agency approvals; UL, CSA, VDE/TUV, and CE

     

    Please visit our Proportional Controllers page for versions with different control modes and load current / line voltage ratings. Our technical team is ready to help at support@hbcontrols.com / 800.879.7918 if you’d like to receive more information on our proportional solid state relay power controllers.

Contact

HBControls

18 Rosary Ln, Bldg 2

Hyannis, MA 02601

800.879.7918

508.676.7345

support@hbcontrols.com

sales@hbcontrols.com