• Panel mount solid-state relay (Crydom CMD6090)
  • DC input, zero-crossing 600Vac / 90A output @ 40C
  • Direct-bond copper (DBC) substrate for superior thermal performance
  • Direct-power lead-frame design reduces solder joints and enhances reliability
  • IP20 touch-safe housing
  • EMC compliant, level 3
  • Agency approvals; cURus Recognized, CE

HBC-D6090 (Crydom CMD6090) 90 Amp / 600Vac Solid State Relay

SKU: HBC-D6090
  • Additional Information:

    In Stock - product normally ships within 24 hours. Please contact us at 800.879.7918 / sales@hbcontrols.com for order quantities ≥10 pieces to confirm availability and volume discount pricing.


    International Shipping: HBControls ships internationally to all non-sanctioned countries. For orders outside of the United States, Mexico or Canada, please contact us at +1 800 879 7918 / sales@hbcontrols.com.


    Product Datasheet: HBControls HBC-x60 Series Solid-State Relays

  • Product Description:

    The HBC-D6090 is a Crydom CMD6090 solid state relay private-labeled exclusively for HBControls and used in our popular C series stripwire power controllers. Other than the label, the HBC-D6090 is identical to the Crydom CMD6090, capable of switching 90 amp loads at line voltages between 48Vac and 600Vac when mounted to a suitable heat sink. The output circuit utilizes two SCRs configured in inverse-parallel, ideally suited for switching power in harsh industrial environments. Both SCRs are mounted to a direct bond copper (DBC) substrate to maximize thermal efficiency between the SCR junctions and the base plate of the solid state relay.


    The input of the HBC-D6090 solid state relay accepts control signals between 4Vdc and 32Vdc and requires <20mA of source current @ 5Vdc to trigger the output semiconductors. The input and output of the solid state relay are optically isolated, providing 4kVrms dielectric protection between the AC mains and personnel / control circuitry. An LED input-status indicator allows for easy visual identification of the status of the solid state relay input circuit.


    The HBC-D6090 / CMD6090 has a zero-crossing output, which will not conduct load current when an input signal is applied until the AC supply passes through the zero crossing point of the sine wave. This greatly reduces inrush current through the load and reduces the level of conducted emissions coupled onto the AC mains.


    Box-clamp terminals can accommodate bare wires up-to 8 gauge for the output and 12 gauge for the input.


    Typical applications include resistive heating loads, motor loads, and other inductive loads with a power factor ≥0.5.  


    A heat sink is normally required in order to prevent the solid state relay from overheating during normal operation. The HBControls C series solid state relay power controllers utilize an HBC-D6090 / CMD6090 series solid state relay pre-assembled onto thermally efficient heat sinks and fully derated for operation in a 40°C ambient temperature.



18 Rosary Ln, Bldg 2

Hyannis, MA 02601