- Crydom panel mount solid-state relay
- 3-32Vdc input
- Zero-crossing 24-280Vac / 50A output
- Back-to-back (inverse parallel) SCR output maximizes long-term reliability
- Direct-bond copper (DBC) substrate for superior thermal performance
- Direct-power lead-frame design reduces solder joints and enhances reliability
- Mean time before failure (MTBF) >7 million hours when operating in a 60°C ambient temperature
- EMC compliant, level 3
- Agency approvals; cURus (UL) Recognized, CSA, VDE/TUV, CE
Crydom D2450 50 Amp / 24-280Vac, DC Input, Panel Mount Solid State Relay
Additional Information:
Discount Codes:
HBC500 - Enter promo code on checkout to receive a 5% discount on orders ≥$500.
HBC1K - Enter promo code on checkout to receive a 10% discount on orders ≥$1,000.
Please submit a quote request form for volume pricing ≥75 pieces.
Shipping: All website orders >$100 are eligible for free ground shipping within the United States
In Stock: Product normally ships within 24 hours.
Condition: New / Unused
Product Datasheet: Crydom Series1 Solid-State Relays
Warranty: Additional information is available on the Policies page of our website
Solid State Relay / Heat Sink Assemblies:
Product Description:
The Crydom D2450 is part of the Series 1 range of solid state relays; Crydom’s “signature” product family and the most popular solid state relays in the market. The D2450 is capable of switching 50 amp loads at line voltages between 24Vac and 280Vac. Designed for endurance and reliability in harsh industrial applications, the D2450 utilizes rugged back-to-back (inverse parallel) SCRs to switch power to AC loads. This significantly reduces the total power dissipation of the D2450 in comparison to similar triac output solid state relays, in addition to enhancing the relay’s ability to withstand heavy surge currents. The typical MTBF (mean time before failure) of a Crydom D2450 is >7 million hours.
The D2450 is a DC input solid state relay and can accept control signals between 3Vdc and 32Vdc. It incorporates an active current-limiting circuit, which enables it to switch 50 amp loads with only 12mA of input current. This makes them highly compatible in applications utilizing low-power PLCs or control boards.
The Crydom D2450 uses zero-crossing optical isolators to trigger the output SCRs. When an input signal is initially applied, the output of the solid state relay will not conduct load current until the AC mains passes through the zero-crossing point of the sine wave. This greatly reduces inrush currents and minimizes the level of conducted emissions coupled onto the AC mains by the solid state relay.
Additional features and benefits of the Crydom D2450 solid state relay include:
- Direct bond copper (DBC) substrate for superior thermal performance
- Epoxy-free design to eliminate stress caused by the expansion and contraction of epoxy during normal operation
- Direct power lead frame design to minimize solder joints in the load-current path
- SEMS screws and washers for improved pull-out ratings
- Redesigned solid state relay housing with anti-rotation barriers
- Shock & vibration resistant to IEC 600068-2-6 & IEC 600068-2-27
- Agency approvals; cURus, CSA, VDE and CE compliant
- EMC compliant (level 3)
Typical applications for the D2450 solid state relay include; resistive heating, motor control and inductive applications with a power factor ≥0.5.
A heat sink and thermal compound are normally required to prevent a solid state relay from overheating during normal operation. The D2450 is used in a wide range of HBControls power controllers, which are solid state relays pre-assembled onto custom designed, thermally efficient heat sinks. Solid state relay power controllers offer enhanced reliability, performance and are fully derated to their maximum load current rating in a 40°C ambient environment.
Please contact us at support@hbcontrols.com / 800.879.7918 if you’d like to receive more information on Crydom’s Series 1 solid state relays or discuss specific application requirements.
